台湾华仪7630全功能接触电流测试仪
特点
可与华仪电子的安规测试仪连结;组成安规六合一(ACW/DCW/IR/GB/RUN/LLT)测试系统
超大型 320 x 240 Graphic LCD ,可同时显示量测电压/接触电流及测试时间
量测频宽 DC - 1MHz 完全符合 IEC60990 接触电流测试规范
可量测大峰值 75mApeak / 有效值 35mArms,满足安规机构测试验证需求(选配)
内建 7 组人体模拟阻抗(MD)且可扩充一组,一台仪器就可以满足多种安规标准要求
MD具有BNC量测端子,可外接示波器或电压表读取MD电压值,方便对MD进行校准
人体模拟阻抗(MD)的校准方式,可以完全符合IEC60990标准规定进行
可灵活选择MD漏电流量测点(如: IEC60065 U1&U2);符合安规标准要求
负载大容量为 10KVA / 40Arms,允许启动瞬间承受 250Apeak 不切断保护
可选配产品电气性能量测模块(RUN Test Module),可量测功率/电压/电流/功率因子
可选配多功能界面卡内含USB-A数据收集功能,内部记忆可储存至少10万笔的测试结果
7630 Touch Current Tester
Opt.731 GPIB Interface
Opt.751 Multi-function Interface Card
Multi-function Interface Card with USB-A type + Bar Code PS/2 type + RS232/RS485 Interface
Opt.752 Run Test Function
Opt.753 HV(3.5KVac/3.5KVdc) & GB(40A) Link Module
Opt.754 High Measurement Range 35mArms / 75mApeak & 4MDs
Opt.758 Ethernet Card
Include Bar-Code I/P, Ethernet, and RS232 port.
Opt.760 HV(5KVac/6.0KVdc) & GB(40A) Link Module w/o Safety Listed
Opt.761 Measuring Devices Voltage DIsplay
Opt.763 USB & RS232 PC Control Card
1101 高压测试线
Molded Male to Alligator Clip. For applying the hipot test voltage to the DUT.
1105 高压连接线
Molded Male, White, Both Ends. It is used to interconnect between Matrix Scanners and hipot tester.
1109 高压输出连接线
Molded Male, White, to Open End. It allows hipot test voltage output connect to the DUT.
1111 扫描控制线
25-pin D type, Male to Female. It is used to connect to Matrix Scanner .
1123 高压连接线
Molded Male, White, to Ring Lug.
1148 DUT 输出连接线
1150 DUT 电源输出连接线
1151 DUT 电源输入连接线
1217 耐压/接地阻抗信号控制连接线
9-pin D type, Male to Female, with Interlock Disable key Ground Bond Input Signal connect to Hipot Output Signal.
1219 耐压/接地阻抗信号控制连接线
9-pin D type, Male to Female, with Interlock Disable key. For Safety link test.
1306 高压测试棒
For applying the hipot test voltage to the DUT.
1505 Interlock Disable Key
Interlock Function at rear panel(Signal Input).
1928 远程控制盒
With Interlock Disable function.
1929 远程控制盒(含LED显示)